Portable air cooled spot cooler 11900BTU for outdoor event rental
Our Spot Coolers range in different capacity, making them ideal for applications where relatively small spot cooling capacity is required for a defined location.
These spot cooler rental are preferred because of their convenience and efficiency -- no water lines need to be introduced in the desired room. Our portable air conditioners use ambient air in the surrounding environment so they don’t need any kind of special intake system to operate.
Spot cooler rental created from the refrigeration process is exhausted off the top of the unit and can be ducted into the ceiling plenum or directed out the nearest door or window to exit the room or space. There’s no need to break the bank at Home -- our cheap portable air conditioners can handle virtually all spot-cooling scenarios … set up and operational in less than five minutes.
General Safety Information
DO NOT use the unit in wet environments, such as a laundry room, to avoid the risk of electrical shock.
1. DO NOT place any foreign objects on the unit.
2. DO NOT allow chemical substances to come into contact with the unit.
3. DO NOT operate the unit in the presence of fl ammable substances or vapors such as alcohols, pesticides, gasoline, etc.
DO NOT operate the unit in explosive or fl ammable environments
1. DO NOT use the plug to start and to stop the unit. Always use the control panel to start and to stop the unit.
2. Always turn off the unit when it is not in use and unplug the power plug from the electrical outlet
3. AVOID the use of adapter plugs or extension cords. If it is necessary to use an extension cord or an adapter plug to operate the unit, ensure that they are correctly rated for the application. Consult a local qualifi ed lectrician and all local electrical codes to ensure proper setup. Any extension cord used with this device must be rated for a minimum of 220V)
4. DO NOT unplug the unit by pulling on the electrical cord. Keep electrical cord away from heat sources and always completely unroll the cord to avoid overheating. If the power cord becomes damaged, a qualifi ed service agent, qualifi ed electrician, or similarly qualifi ed person must replace it, in order to avoid a hazard or shock.
